How to Fix ‘Replace Waste Toner Box’ on Sharp MX-5050V MX-3050V, MX-5070V

Solution for ‘replace waste toner box’ in Sharp MX-5050V

This article describes how to clear the “replace waste toner box” message from the Sharp MX-5050V MX-3050V, MX-5070V, MX-3070V, MX-6050V, MX-3550V, MX-6070V, MX-3570V, MX-4050V, and MX-4070V copier. We are discussing the method to replace the waste toner box in this article. You can replace it in very few steps. I hope this will be able to solve your problem.

Meaning of the error code ‘replace waste toner box’

This message shows when the waste toner box is completely full of waste toner and it needs replacement. The machine deposits the excess toner from the printing process into this box to make the copy neat and clean. You need to replace the waste toner box or clean the old west toner box machine. It is very easy to empty.

Method for replacing waste toner box

  1. Open the front door. You will see a large black box. and above this a green button Will also see.
  2. Press the Green button to release the waste toner box. Lift the box upward from the machine and remove the box. Don’t shake the box while removing.
  3. Empty the waste toner into a bag or waste box by removing the seals around the holes. Be careful when disposing of the toner. don’t inhale it. Make sure the box is completely emptied. Clean it with a vacuum. The error will again continue to show If the toner particles remain there.
  4. Plug the holes and push the empty waste toner box back into the machine.
  5. Close the front door.
  6. Turn the machine off and on. It will reset the machine.
Tags

No responses yet

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories